The internet is one of the basic requirements of man due to its numerous application in everyday life of people from almost all age groups. Thus, people use a router to connect their devices to the internet.
Since every external device is connected to the computer or any other operating system over an IP address, there exis more than 4,294,967,296 IPv4 addresses, which are used to identify any external device.
What is an IP Address?
IP is an abbreviation for Internet Protocol. It is a numerical value assigned to a particular device so that it can be recognized by a computer or any other operating system, when connected.
192.168.1.1 IP Address:
Of all the 4,294,967,296 IPv4 addresses which exist, you will regularly come across 192.168.1.1 this IP address since it is the default IP address of most of the routers/modems which are used to connect any device to the internet.
192.168.1.1 is the default IP address of routers from various well-known manufacturers such as TP-Link, Cisco, D-Link, Netgear, etc.
Why do you need 192.168.1.1 this IP Address?
Since 192.168.1.1 is the default IP address of most of the routers/modems, it can be used to access the administration page of those routers/modems. In the administration page, various changes such as the service name, WLAN settings, access control, can be made to configure the router to its optimum settings. 192.168.01 Login Guide
How to Login to 192.168.1.1 IP Address?
Step 1- Connect your computer or your smartphone to your router/modem using LAN wire or wireless network.
Step 2- Launch a web-browser on your device and enter 192.168.1.1 in the search box and hit the ‘Search’ option.
Step 3- You will notice a login page appears on your screen. Here, enter ‘admin’ as the username as well as the password since it is the default username and password.
Note: If you have already changed the login password, ‘admin’ will not work as your login password.
What to do if you happen to forget your router’s login username or password?
There are a couple of methods which you can use to login to 192.168.1.1 IP address of your router.
Method 1: Check the bottom of your router for any specifications of the login username and password.
Method 2: If you have changed your login username or password and somehow cannot remember it, you have to hard reset your router.
Then, you can use your default username and password to login to the administration page of your router from 192.168.1.1 this IP address.
How to Search for your Router’s Default IP Address?
Almost all the routers from a specific manufacturer have a common IP address. For example, most of the TP-Link routers have 192.168.1.1 as their default IP addresses.
However, it is possible that your router’s default IP address has been changed to some other IP address. Thus, it is necessary for us to know how to find any router’s default IP address. The steps involved in doing so are listed below.
Step 1- Connect your computer/laptop to your router/modem using LAN wire or wireless network.
Step 2- Now, on your computer, launch ‘Command Prompt’ and type ‘ipconfig’ and hit ‘Enter.’ You will find the default IP address of your router/modem in the Default Gateway section.
Step 1- Connect your smartphone to your router/modem using a wireless network.
Step 2- Click on the details of the network you are connected to and you will find your router’s default IP address on the gateway column.
You can then use the IP address to access the administration page of your router to make any changes in it.
Why is that you are not able to access 192.168.1.1 this IP address?
There is a possibility that you are having some issue while connecting to your router’s IP address. If so, you need to check if you may have done something wrong. Some of the most common mistakes which can be checked are listed below:
1. IP address may not configured correctly.
2. An incorrect IP address is used in the browser. For example, 18.104.22.168 is different from the actual IP address which is 192.168.1.1 and thus, this error.
3. The router may be damaged and might not be able to establish a connection with the router. You can try refreshing your router by restarting it or you can hard reset it and reconfigure it.
4. The wrong proxy is installed in the browser. So reconfigure the proxy properly to access 192.168.1.1 this IP address.
5. The IP address is used as link www.192.168.1.1 instead of http://192.168.1.1 in the browser. This is one of the most frequently observed error.
How to Connect two routers having the same IP Address?
If you have two routers having the same IP address, you can follow the steps listed below to connect them simultaneously.
Step 1- Connect one of the routers to your computer by using LAN cable and then, go to https://192.168.1.1 on your web browser. Login to your administration page by entering the username and password.
Step 2- Now, in the administration page, go to Network or LAN Setup and modify the IP address from 192.168.1.1 to 192.168.2.1 and save the changes which you have just made.
Step 3- Finally, connect both the routers using a LAN cable and you will notice that they start working simultaneously.
Note: Some of the latest Routers have an auto setup mode which allows the users to configure it manually. If the user does not wish to configure a the router manually, then such people can automatically set it up for the user. It will automatically find your Default Router Login IP address and Password for you.
This is how you can connect two routers having the same IP address simultaneously.
This is all you need to know about 192.168.1.1 this IP address and how you can use it in distant ways and how you can recover it in case you are having any kind of connectivity issue with the IP address.
If you have anything to add or if you have any queries about 192.168.1.1 this IP address, then please let us know about it in the comments section below.